Guide to the correct use of laboratory electronic balance | 01 Position

2023-03-09

The weighing table should

When the electronic balance is used in a stable way (test bench, test table, stone table) for weighing, the weighing table shall not sag, and vibration shall be avoided as much as possible.

The use method of the electronic balance is diamagnetic (there is no steel plate inside or on the surface of the test bench);

The use method of electronic balance is anti-static;

Use method of electronic balance: wall or ground installation: the weighing platform shall be installed on the ground or wall, and choose one of the two. If installed in the above two places at the same time, the balance will be affected by the sources from both directions at the same time;

The use method of the electronic balance shall leave enough space for the balance. The installation position and the weighing platform must be stable enough to ensure that the reading of the balance display screen will not change when someone leans against the experimental platform or stands on the weighing station. Do not place soft pads, such as writing pads, under the balance. The ideal position of the balance is at the table foot of the experimental platform, because the vibration here is the minimum.

The laboratory or weighing room shall;

The use method of the electronic balance is vibration-free;

The electronic balance is used without air flow;

The use method of electronic balance is to place the weighing table in the corner of the room with constant temperature. These places are usually areas without vibration force in the building. It is better to use sliding doors in the room to reduce the impact of door opening and closing;

Next —

Does the analytical balance need desiccant? This will solve your doubts

Related News